PlusSmart TechnologyVIETNAM Free site assessment
PlusSmart Vietnam › Solutions › i-ALERT
Exclusive distributor · ASEAN, Australia, NZWireless sensor

i-ALERT® – vibration, temperature and run-time monitoring for any rotating machine

Mount it on pumps, motors, fans and gearboxes with a magnetic base in minutes. The sensor measures continuously and sends data to the i-ALERT AI cloud platform, which learns each machine's baseline and gives early warning of abnormal signs.

Book a demo assessment Download the catalogue (PDF)
In simple terms: it is like a smartwatch for your machines. A person wearing a smartwatch knows their heart rate is abnormal before they feel tired; a machine wearing i-ALERT is the same – when vibration rises or it heats up, you see it on your phone before anyone hears a strange noise.
Real-world photos

i-ALERT® in the field

i-ALERT sensor – magnetic mount, wireless
i-ALERT sensor – magnetic mount, wireless
A PlusSmart engineer reviewing i-ALERT data on a tablet on site
A PlusSmart engineer reviewing i-ALERT data on a tablet on site
A deteriorating pump – the kind of 'bad actor' i-ALERT helps catch early
A deteriorating pump – the kind of 'bad actor' i-ALERT helps catch early

Photos: PlusSmart Technology (plussmart.tech).

How it works

How i-ALERT works

1stepsMount the sensor on the bearing2stepsMeasure vibration and temperature 24/73stepsThe cloud learns the baseline4stepsAlerts & prioritisation
3-axis vibrationIdentifies bearing wear, misalignment, imbalance and mechanical looseness from vibration levels and trends.
Surface temperatureRising friction, poor lubrication, overload – bearing temperature rises before failure.
Run hours & cyclesKnow which machines run most and which standby units have sat idle, so you maintain the right machine.
Wireless, no external powerMagnetic base, wireless connection to a gateway or phone – no cabling, no shutdown to install.
i-ALERT AI platformCombines vibration, temperature and run hours with machine learning for early detection, work prioritisation and plant-wide performance optimisation.
Multi-plant viewOne screen for all equipment across multiple plants and countries – ideal for groups with many sites.
Products & modules

What i-ALERT® includes

i-ALERT sensors

Poseidon Systems' machine health monitoring ecosystem: sensors mounted directly on rotating equipment, built for industrial environments.

  • Measures vibration, temperature, run time
  • Magnetic mount, installed in minutes
  • For pumps, motors, fans, gearboxes, compressors

i-ALERT AI platform

A cloud system that turns raw data into actionable information: early detection, prioritisation, trend tracking.

  • Learns a baseline for each machine
  • Threshold-based and trend-based alerts
  • Management reporting, CMMS integration

Powered by PlusSmart

PlusSmart helped develop i-ALERT from the start and knows how to take the platform beyond its defaults.

  • Advanced alarm management
  • Remote FFT diagnosis by engineers
  • ROI calculation and regular reporting
Suitable for

Typical equipment and industries

Centrifugal pumpsElectric motorsIndustrial fansGearboxesCompressorsBlowersWater pumping stationsThermal power plantsRefining & petrochemicalsCement & steel
Real results
25 → <3 mm/sMotor vibration after i-ALERT detected misalignment and the maintenance team realigned it – water treatment plant
4 daysFrom sensor installation to root-cause diagnosis by remote FFT
5/9Assets flagged for immediate action in the first assessment
> 5:1Payback ratio of the pilot project
How to start

Book a short site visit to select the first 5–10 machines for a live sensor demo.

After mounting the sensors on magnetic bases, you collect data for a few weeks; PlusSmart analyses it and sends back a report – you see the value before deciding to scale up.

Book a demo assessment
In-depth technical guide to i-ALERT

ISO 10816-3 vibration limits, the FFT "signature" of each fault type, correct sensor placement and frequently asked questions.

Read the guide: ISO 10816 vibration standard & FFT (Vietnamese) →Read the full technical article on HOANTRANTDH →
FAQ

i-ALERT frequently asked questions

Does i-ALERT need cabling or a power supply?

No. The sensor is wireless, battery-powered and mounted with a magnetic base. No shutdown is needed to install it.

Can it be used on machines in dusty, humid or outdoor environments?

Yes. i-ALERT is designed for industrial rotating equipment and runs in thousands of plants, including mining and oil and gas.

How many machines should we start with?

Usually the 5–10 most critical or most failure-prone machines, running a demo for a few weeks before scaling up.

Works with
ElectroSine ESine3 / ESine4Electrical signature analysis for motors and driven equipmentPoseidon Systems Trident™Real-time oil quality and metal debris monitoringPlusSmart AnalyticsPump-engineer-led data analytics
Contact PlusSmart

Does your plant have pumps that keep failing? Book a free site assessment

We review your existing operating data, identify the highest-risk pumps and propose monitoring that fits your budget. Quotations and lead times are provided directly by PlusSmart Technology – information is always confirmed.

HT
Hoan TranBusiness Manager, Vietnam · PlusSmart Vietnam · View the appointment letter+84 879 848 668 · hoan.tran@plussmart.tech
Call now Message on Zalo Download the catalogue (PDF)

PlusSmart Technology Pte. Ltd. · 10 Anson Road, #21-07 International Plaza, Singapore 079903 · info@plussmart.tech · +65 8035 1434
Operating in Singapore · Vietnam · ASEAN

Send an assessment request

Takes 1 minute – we reply within 1 business day.

Your email app has opened with the details filled in. If not, call or message +84 879 848 668 (WhatsApp/Zalo).
Information is used only to contact you and is never shared with third parties.
Zalo